MTC Series Temperature Scanners

MTC-50 & MTC-50E are tablet-based system, equipped with face recognition detection system. It is integrated with contactless thermal imaging temperature detection module, and automatically detects “fever suspect” for those who is measured higher than the reference setting. The person will be taken aside by the security for reconfirmation. It also supports alarm with real-time voice warning and automatically saves the image when required.

MTC Series can perform fast taking temperature and able to connect to a remote computer to have the mirroring image on the screen, and to do web management too. It also has the option to have an integrated ID card reader for additional verification.

As it is a simple-to-use product, it can be installed in offices, child-care, schools, receptions, factories, religious location, etc. In places where there are turnstile for entry, the system can be integrated together to prevent any “fever suspect” from entering the facility.


  • Public Buildings
  • Offices
  • Malls
  • Factories
  • Schools/Child-care Centres

There can be different scenarios where the temperature of the person walking through the monitoring system that may escape the temperature measurement system. Therefore we have incorporated an additional layer using AI face recognition technology to minimize such occurrence


  • Supports Vanadium Oxide uncooled sensor to measure target's temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
  • Recognition distance: 0.5 to 1.5 m
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Displays temperature measurement results on the authentication page
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%
  • 6000 face capacity, 6000 card capacity, and 100,000 event capacity
  • Suggested height for face recognition: between 1.4 m and 1.9 m
  • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
  • Audio prompt for authentication result
  • Connects to external access controller or Wiegand card reader via Wiegand protocol
Temperature Measurement
Temperature Range
30 °C to 45 °C (86 °F to 113 °F)
Vanadium Oxide uncooled sensor
120 × 160
Frame Rate
25 fps
± 0.5 °C, without black body calibration
Measuring Distance
0.3 to 1.5 m
Touch screen
2MP, Dual-lens
Network × 1, RS-485 × 1, Wiegand × 1, USB × 2, Alarm output x 1, Alarm input × 2, Lock ×1, Door contact × 1, Exit button × 1, Tamper × 1
Wired Network
Support, 10/100/1000 Mbps self-adaptive
Card Capacity
Face Capacity
Event Capacity
Card Type
Mifare 1 card
Card Reading Distance
0 – 5cm
Card Reading Duration
< 1s
Recognition Mode
Face 1:1 and 1:N
Face Recognition Duration
< 0.2s per person
Face Recognition Distance
0.5 – 1.5m
Face Anti-Spoofing
Face Mask Inspect
Power Supply
Working Temperature
0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
Working Humidity
10 to 90% (No condensing)
Application Environment
Indoor and windless environment use only
* Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger)
Click to view more